WebGate WebEye A10 Betriebsanweisung PDF herunterladen (Seite 39)

- 39 –

WebEye SPD User’s Guide

user PC’s performance and network line capacity. WebEye can transmit to up to 100 users

simultaneously. If 5 users are receiving 10 frames per second, the total frames that WebEye to transmit

are 50 frames per second. In this case, WebEye transmits 50 per second from its viewpoint. And the

total size of 50 frames’ images is under the network bandwidth. When WebEye is on 10 base-T

network, the line can transmit 123 frames of 3KB-images per second

7) What is maximum number of users to access WebEye at the same time?

Very unique compared to other products, WebEye supports up to 100 persons at the same time.

Originally WebEye supports more than 100 persons; however, its capacity is fixed to 100 persons to

supports already accessed users at rapid transmission speed. When 100 persons access WebEye, they

can receive 1 frame per about 10 seconds.

8) Is there any limitation on making ID or password?

Yes, there is a limitation and it is very important. You have to compose any ID or password within 9

bytes both for user and administrator account. 9 English characters are equal to 9 bytes.

2. About WebEye Installing.

1) What network line is to be used?

All network lines can be used except a telephone line. In case you do use network lines of xDSL, cable

modem, and ISDN that have dynamic IP addresses, the process of installing and accessing to WebEye

is a bit different to dedicated line that has fixed IP address. However, user’s PC can utilize telephone

line without a doubt.

2) What is maximum extension range of network lines?

UTP cable that is used for LAN can be extended up to 100 meters without bridging. However existing

UTP cable can be extended up to 240 meters without bridging.

3) Is a special rack or housing needed when WebEye SPD is installed outdoors?

WebEye itself is not weatherproof. Therefore, it is necessary to equip WebEye with weatherproof

housing if WebEye is installed outdoor, like existing Dome camera.

4).When the network is consisted with one permanent IP address and several private IP

addresses, can WebEye be connected at the network with a private IP address?

WebEye is a Web server. WebEye can be assigned to with a private IP address. However WebEye

should be designated as a local server.

A network that has a fixed IP address is normally equipped with a router and consists local network

with various private IP addresses. In this case, all the devices connected on the local network are

assigned with private IP addresses. However, all the devices communicate with remote devices using a

fixed IP address. Router does convert private IP address into fixed IP address, and have local devices

access to remote devices. This function is called as NAT(Network Address Translation).

When you configure a router, you can designate a local device as a local server among all the devices.

And you have to key in WebEye’s IP address in the blank for the local server address. Otherwise, you

cannot access WebEye from remote network. This case happens often when you install WebEye on a

local network where a PC is already designated as proxy server.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 50 51

Keine Kommentare

WebGate WebEye A10 Betriebsanweisung Seite 39