WebGate WebEye A10 Betriebsanweisung PDF herunterladen (Seite 15)

- 15 –

WebEye SPD User’s Guide

Request timed out

Reply from 200.243.232.178: bytes=32 time=2ms TTL=255

Ping statistics for 200.243.232.178:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milliseconds:

Minimum = 1ms, Maximum = 2ms, Average = 1ms

If you don’t receive the reply by the 'ping' command, try pressing 'F3' and 'Enter' keys again.

Normally ‘Request timed out’ messages appear 7 times before you receive proper reply.

If you succeed in utilizing above commands, you will receive reply continuously. You may stop

them by pressing <Ctrl>+<C> keys.

When you stop receiving reply with <Ctrl>+<C> keys, data loss may be from 0% to 99%

statistically, meaning it is normal to get ready. This is normal reply you would get. If the statistic

shows ‘100% loss’, you should check the following criterions such as; whether network line and

connection status are stable or not; whether it is available IP address which is assigned to WebEye or

not; and whether a PC has got the same local network’s IP address as WebEye has. Same local IP

address of C grade network means that first 3 rooms’ numbers are same but the fourth ones are

different. For example 192.168.1.2 and 192.168.1.3 are same local network IP addresses. (If there is

‘Network Mask’ on network, it can be a different case. For detailed information on IP, refer to

appendix 3)

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 50 51

Keine Kommentare

WebGate WebEye A10 Betriebsanweisung Seite 15