WebGate WebEye E104 Betriebsanweisung PDF herunterladen (Seite 67)

WebEye E10/E104WebEye E10/E104

User’s Guide

(Appendix 5)

Upgrading WebEye Firmware

1. Connect WeEye to a PC.

• Directly connect WebEye to a PC with a crossover cable. This connection is recommended.

• Connect WebEye to a PC through a HUB with a direct cable.

* This process can also be done on a remote network. However it is not recommended.

Warning

This process is to update WebEye with a new firmware.

Make sure to complete the whole process, since you begin the process

. When the

process is completed, ‘User Image Upgrade is complete’

message appears. During the

process, do not give physical shock nor disconnect network an

d power. Otherwise, your

WebEye can be damaged

seriously, which may result inappropriate operation or

operation failure.

If you failed in upgrading WebEye firmware or WebEye does not operate properly after

successful upgrading process, contact WebGate distributor in your area.

Crossover cable

HUB

Direct cable

Local PC

1 2 ... 62 63 64 65 66 67 68

Keine Kommentare

WebGate WebEye E104 Betriebsanweisung Seite 67